A Few Star Wars model ideas for 3d printing

0

In this article we look at some of our favourite Star Wars designs that you can download for free and print with your 3d printer. there are many designs for my favorite all time film but these are my top picks of the many available.

Star Wars X Wing Fighter

This is a sliced solid giving two shells. The file should print well in the vertical position with the sliced surface on the print bed.

https://www.thingiverse.com/thing:909499

Star Wars Logo

This design is formed by two divided pieces.You will either need to use black and yellow filament (or just use acrylic paint). You can use the “stop at height” Cura plugin to change the filament to yellow. With the original file stop at height 27 mm (with a total height of 30 mm)

You can use the split versions, just print the bottom part in black and the upper part in yellow and glue it together.

Printer Brand: MK3
Printer: various
Rafts:No
Supports:No
Resolution:0.2 mm Quality
Infill:20
Filament: Smartfill by Smart Materialsl PLA Black and Yellow

https://www.thingiverse.com/thing:2006957

Star Wars – TIE Fighter

A tie fighter with 3 options to choose from

1) The complete ship
2) The two wings and the body (requires soldering to make room for the wing to fit in and fit pieces together)…
3) The whole ship cut in half (requires soldering two fit two pieces together, the wings are more fragile due to the thinness of the connector)

https://www.thingiverse.com/thing:474748

2 Star Wars Clocks

A fantastic clock design that you can print

Printer: CR10-S
Rafts: No
Supports: No
Resolution: 0.2
Infill:20

https://www.thingiverse.com/thing:2946867

here is version 2 of the clock

Printer Brand: Creality
Printer: CR-10S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 25

https://www.thingiverse.com/thing:3017754

Mini Chewbacca – Star Wars

A cute cartoon like chewbacca

https://www.thingiverse.com/thing:2893608

Star Wars R2D2 cookie cutter

A practical design that you can print out – this time its a cookie cutter in the shape of R2D2

https://www.thingiverse.com/thing:229667

Star Wars Fidget Spinners

Can you remember when fidget spinners were the latest craze – with this project you can print your own star wars fidget spinner. there are several designs including Kylo Ren, Yoda and Boba fett.

One of the users made it with these settings

Printer: IIIP
Supports: No
Resolution: 0.2
Infill: 75%

Notes:
At 100% scaling the bearing hole is slightly too large (i.e. bearing does not stay seated). I scaled entire model to 98.5% of original size

https://www.thingiverse.com/thing:1962118

Imperial Star Destroyer – Star Wars High Detail

A very nice high res model of the Imperial Star Destroyer. here was one users settings

Printer: Core XY
Rafts: No
Supports: No
Resolution: 0,2
Infill: 30%
Filament: Bestfilament ABS White

https://www.thingiverse.com/thing:2802061

Star Wars Star Destroyer with Detailed Stand

A Star Wars Star Destroyer, modeled specifically for 3D printing. The model is divided into separate pieces that may be glued together. This way very few supports (if any) are needed.

Printer Brand:Anet
Printer: A8
Rafts: Yes
Supports: Doesn’t Matter
Resolution: 0.15 mm
Infill: 15 %
Filament: TILANSE PLA 1,75 mm Blue

https://www.thingiverse.com/thing:629759

star wars keychain v 1.1

A neat Star wars logo keychain

Rafts: Yes
Supports: Yes
Resolution: 0.2
Infill: 50 %

Notes:
2500 mm/min max

https://www.thingiverse.com/thing:925632

Star wars Gold dice of han solo

These were the dice that were appeared in the Millenium Falcon – they were in the Solo movie. You print this design and paint it gold

Printer Brand: Creality
Printer: CR-10
Rafts: Doesn’t Matter
Supports: Yes
Resolution: 0.1
Infill : 100%

https://www.thingiverse.com/thing:2868252

Do you have a favorite design – tell us in the comments what you have designed or printed

You might also like More from author

Comments are closed, but trackbacks and pingbacks are open.